טלפון

03-617-6888

רחוב כנרת 15, בני-ברק
5120260 ישראל

CALL US

972-3-6176888

15Kineret st,Beni-Brak

5120260 Israel

FOX T USW 103

FOX T USW 103

Three Input Switcher with Integrated Fiber Optic Transmitter for HDMI, VGA, Audio, & RS-232

Key Features

  • Transmits HDMI or analog video, stereo audio, and RS-232 signals very long distances over fiber optic cabling
  • All-digital technology provides pixel-for-pixel performance with signals up to 1920×1200, including HDTV 1080p/60
  • Digital conversion of analog video and audio input signals
  • Auto-switching between inputs
  • HDCP compliant
  • Key Minder® continuously verifies HDCP compliance for quick, reliable switching

The Extron FOX T USW 103 is a three input switcher with an integrated fiber optic transmitter that provides long haul transmission of HDCP-compliant HDMI, RGBHV, or HD component video, stereo audio, and RS-232 signals over fiber optic cabling. Engineered for exceptional high resolution image performance, it uses Extron all-digital technology to deliver perfect pixel-for-pixel transmission of images up to 1920×1200, including HDTV 1080p/60. Designed specifically for AV systems, the transmitter is equipped with many integrator-friendly features such as EDID Minder®, Key Minder®, audio embedding, audio gain and attenuation, auto-input switching, and real-time system monitoring. These features and the compact, low profile enclosure of the FOX T USW 103 allow for discreet installation in a wide variety of applications.

FOX T USW 103 System Diagram

FOX T USW 103
 NOTE The FOX T USW 103 is not compatible with the FOX 3G HD-SDI, FOX 3G DVC, or FOX AV models.
 NOTE These units are class 1 laser products. They meet the safety regulations of IEC-60825.
 NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Optical fiber interconnection between transmitter and receiver
   Number/type 1 or 2 fiber optic
   Connectors 2 LC connectors
   Operating distance
      Singlemode 30 km (18.75 miles) with singlemode (SM) cables
      Multimode 300 m (984') with 62.5 µm OM1 multimode (MM) cables
1 km (3280') with 50 µm OM2 multimode (MM) cables
2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimized multimode cables
    NOTE Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
   Nominal peak wavelength 850 nm for MM, 1310 nm for SM
   Data rate 4.25 Gbps
   Maximum pixel clock 165 MHz
   Transmission power
      Singlemode -5 dBm, typical
      Multimode -5 dBm, typical
   Maximum receiver sensitivity
      Singlemode -18 dBm, typical
      Multimode -12 dBm, typical
   Optical loss budget
      Singlemode 13 dB, maximum
      Multimode 7 dB, maximum
Video
   Digital
      Resolution range 640×480 up to 1920×1200, 480p, 576p, 720p, 1080i, 1080p @ 60 Hz sampled pixel for pixel; higher resolution 2K (2048×1080) @ 60 Hz undersampled
      Formats RGB and YCbCr digital video
      Standards DVI 1.0, HDMI compliant, HDCP 1.1, CEA-861E
   Analog
      Maximum resolution Up to 1920×1200 or 1080p @ 60 Hz pixel for pixel
      Signal type VGA-UXGA RGBHV, RGBS, component video
      Gain Unity
      Pixel data bit depth 8 bits per channel, 3 channels (R, G, B; or YUV)
Video input
   Digital
      Number/signal type 2 HDMI, DVI, or DisplayPort
      Connectors 2 female HDMI
      Equalization Up to 50' of cable
   Analog
      Number/signal type 1 VGA-UXGA RGBHV, RGBS, component video (YUVp/HDTV)
      Connectors 1 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Minimum/maximum levels Analog: 0.3 V to 0.75 Vp-p with no offset, terminated
   Impedance 75 ohms
   Horizontal frequency 30 kHz to 100 kHz
   Vertical frequency 24 Hz to 120 Hz
   Return loss <-40 dB @ 5 MHz
Sync
   Input type RGBHV, RGBS, bi- level and tri-level component video (480p, 576p, 720p, 1080i, 1080p)
   Input level 2.5 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video with tri-level sync
0.3 Vp-p for component video with bi-level sync
   Input impedance 510 ohms
   Polarity Positive or negative (follows input or can be set by user)
Audio
   Gain
      Range Adjustable, -18 dB to +10 dB
      Default Unbalanced output: -6 dB
   Frequency response 20 Hz to 20 kHz, ±0.5 dB
   THD + Noise 0.10% @ 1 kHz at nominal level
   S/N >80 dB at maximum output (unweighted)
   Audio bits per sample 18 bits per channel, 2 channels (L, R)
   Sampling rate 48 kHz
Audio input
   Number/signal type 1 unbalanced stereo
   Connectors (1) 3.5 mm mini stereo jack
   Impedance >10k ohms unbalanced
   Nominal level -10 dBV (316 mVrms)
   Maximum level +7 dBV unbalanced
    NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Communications
   Serial control ports
      Control 1 RS-232, 3.5 mm captive screw connector, 3 pole (rear panel)
      Pass-through 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used, "RS-232 Over Fiber", shared with alarm port) (rear panel)
   Baud rate and protocol
      Control 9600 baud, 8 data bits, 1 stop bit, no parity
      Pass-through 9600 to 115,200 baud
   Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND
   USB control port 1 front panel female mini USB B
   USB standards USB 2.0, low speed
   Contact closure (1) 3.5 mm captive screw connector, 4-pole
   Contact closure pin configuration 1 = input 1, 2 = input 2, 3 = input 3, 4 = GND
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
General
   Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
   Power consumption
      Device 6.2 watts, 12 VDC
      Device and power supply 7.6 watts, 100-240 VAC, 50-60 Hz
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, vents on top and side panels
   Thermal dissipation
      Device 21.1 BTU/hr
      Device and power supply 25.7 BTU/hr
   Mounting
      Rack mount Yes, with optional rack shelf
      Furniture mount Yes, with optional under desk mounting kit
   Enclosure type Metal
   Enclosure dimensions 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 0.8 cm D)
(Depth excludes connectors.)
   Product weight 1.0 lbs (0.3 kg) per unit
   Regulatory compliance CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEE

For an attractive quote and to order the product

Call : 972-3-6176888

Message Us