AVLINK Seamless Matrix Switcher is high performance HDMI switching equipment combining with video and audio. It is used for input/output cross switching of multimedia signals. Through 8 or 16 sets separated HDMI sources, you can transmit multimedia input separately to each multi-output equipment, thereby minimizing signal attenuation and ensuring high definition, integrating high fidelity graphics and audio signal output. Through the extensible accessory devices, The Matrix Switcher can transmit data or detect signal to over long distances about 70 meters with extender (HX-SRW).

• Truly seamless, glitch-free switching between each input
• 16 HDMI Inputs with 8 HDBaseT Outputs
• Any Input can be routed/broadcast to any Output
• Supports up to 70 meters zero compression extension via one single CATx cable
• Supports interlaced video to progressive video. (like 1080i => 1080P)
• Supports up convert. (like VGA => 1080P@60)
• Supports down convert. (like 1080P@60 => VGA)
• Supports cross convert. (like 576i@50 => 1080P@60)
• HDTV resolution up to 1080P (12Bits)
• Compliant with the specification of HDMI 1.3
• Supports 2* aspect ratio modes: “FULL’ mode and “1:1” mode.
• Supports 8* output resolution: VGA, 480P, SVGA, XGA, 720P, SXGA, UXGA, 1080P60
• HDCP Compliant
• EDID management (Copy from OUT port 1)
• Centralized control upon 32 series connections via RS-485
• Memory control can up to 8 sets
• Support resolution up to 1080P@60Hz (12-bit)
• upport original 3D pass through
• Support High Definition Audio
• Fast response time for channel switch
• IR pass-through supports all IN and OUT ports
• IR pass-through supports all kinds of IR frequency band
• IR pass-through supports duplex transmission between IN and OUT ports
• Support IR remote control
• Support IR Mini-Controller to select the input channel through Output configuration
• Support RS-232 control
• Support RS-485 serial control
• Remote Controller for operation